局部图1-传动结构                                                               局部图2-电气控制

产品介绍/ Product Introduction

全自动洗脱机采用国内外流行的下悬浮避震结构,结合多年的生产技术沉淀予以优化,确保在洗衣工厂高强度作业中,多年稳定运行。

The fully automatic washing machine adopts the popular suspension suspension structure at home and abroad, and optimizes it in combination with years of production technology to ensure stable operation for many years in the high-intensity operation of the laundry factory.

1.     采用双道进口柔性密封防水设计,在高速脱水和低速洗涤时,密封体张弛有度,在高频率高强度的工作状态下,也能达到五年之久的更换周期。

Adopting dual-channel imported flexible seal and waterproof design, the sealing body will relax to a high degree during high-speed dehydration and low-speed washing. Under high-frequency and high-intensity working conditions, it can reach a five-year replacement cycle.

2.     上置电机结构,搭配洗涤机械专用变频器,通风散热好,便于维护。确保在洗衣房高温、高湿、多毛绒环境中稳定运行。

The upper motor structure, coupled with a special converter for washing machinery, has good ventilation and heat dissipation, and is easy to maintain. Ensure stable operation in the high temperature, high humidity, and plush environment of the laundry room.

3.     采用720mm大口径装载门,易于操作,减少拉损布草的可能。

Using 720mm large caliber loading door, easy to operate,reduces the possibility of pulling linen.

4.     减震弹簧与液压阻尼器优化组合,减震率高达98%,无须地脚固定安装。同时轴系采用专用锁片固定,最大程度避免振动造成的机械故障。

Optimized combination of shock-absorbing spring and hydraulic damper, the shock-absorbing rate is as high as 98%, no fixed installation is required. At the same time, the shaft system is fixed with a special lock plate to avoid mechanical failure caused by vibration to the greatest extent.

5.     专业智能控制器,操作界面一目了然,内置30套自动程序,可自由编程操作。

Professional intelligent controller, clear operation interface, built-in 30 sets of automatic programs, freely programmable operation.

6.         前倾式洗脱机，采用优质空气弹簧顶升结构，简单可靠。前倾角度18°，多重限位结构设计，既保证了25S快速出料，又兼顾安全性！

The forward tilting washer extractor adopts high-quality air spring jacking structure, which is simple and reliable. The forward tilt angle is 18 °, and the multiple limit structure design not only guarantees the 25S quick discharge, but also takes safety into account!

7.         前倾式洗脱机，采用固定式外接进、排水接口，避免现场安装的不便和后期使用损坏外接管道的困扰和安全隐患。行业内同种结构的前倾式洗脱机,也只有极少数生产商固定了进水管，排水管依然随机器倾斜，这样现场排水口就不能接管道，更不能穿过墙体等障碍物外接，只能采用排水沟，局限了现场使用条件.

The forward tilting washer extractor adopts fixed external inlet and drain interfaces to avoid the inconvenience of on-site installation and the troubles and hidden safety hazards of using externally damaged pipelines in later use. In the forward-tilt washer extractor of the same structure in the industry, only a few manufacturers have fixed the inlet pipe, and the drainage pipe is still inclined by the device, so that the on-site drainage port cannot be connected to the pipeline, nor can it be connected through the wall and other obstacles. , Only drainage ditches can be used, which limits the on-site use conditions.

技术参数 Technical Parameters